How to Open a Hyundai Key Fob
Losing or damaging your Hyundai key fob can be quite frustrating and expensive. While it is important to keep your key fob safe and secure, there may come a time when you need to access its batteries or replace them. This is where knowing how to open your Hyundai key fob can help.
In this post, we’ll guide you through the steps of opening a Hyundai key fob, so you can get back to using your car quickly and without any hassle.
Step 1: Locate the Seam
The first thing you will need to do is find the seam on your Hyundai key fob. This is the line between the two halves of the fob. Once you have located the seam, insert a flathead screwdriver into it and gently pry the two halves apart. You can also use a plastic pry tool, which is less likely to damage the fob than a metal screwdriver.
Step 2: Remove the Key Blade
After separating the two halves of the fob, you will see the key blade attached to one half. Lift the blade out of its slot and set it aside.
Step 3: Remove the Battery
Behind the key blade is the battery compartment. Remove the battery by pushing downward on the tab that holds it in place and sliding it out. Depending on the model of your Hyundai, the battery can be either a CR2032 or CR2025. Make sure to take note of the battery type, so you can replace it with the correct one.
Step 4: Replace the Battery
Once you have removed the old battery, insert the new battery in its place. Make sure that the positive (+) and negative (-) sides of the battery are facing the correct way by following the diagram in the battery compartment.
Step 5: Reassemble the Key Fob
After you have replaced the battery, insert the key blade back into its slot. Align the two halves of the key fob and gently press them together until you hear a click. Make sure that the two halves are flush with each other and that there are no gaps or misalignments.
Conclusion
Knowing how to open a Hyundai key fob can save you both time and money. Following the steps outlined above, you can open your Hyundai key fob, replace the battery, and reassemble it with ease. Remember to always use a plastic pry tool or a flathead screwdriver with caution to avoid damaging your fob.
With these simple steps, you can get back to using your Hyundai key fob and your car without any hassles.
